Diamond Saw Blades Do Not Want To Be Scrapped in Advance? Use These 3 Tricks To Make Your Dreams Come True

In human industrial activities, there are always some materials that are very difficult to process, such as stone processing. At this time, it is often not enough to use those alloy saw blades with weak performance. Therefore, when a similar demand arose, a new type of saw blade was born. In 1885, the first diamond saw blade in human history was born.

In the early days of this type of saw blade, the manufacture of saw blades was almost cost-effective. With the advancement of the times and technology, the corresponding manufacturing technology costs are also reduced a lot.Today, in the processing fields of stone and aluminum, the use of diamond saw blades has long been popular, but it has always been a troublesome thing in the face of the high consumption of diamond saw blades.

As we all know, diamond saw blades have excellent performance, thanks to their solid materials. However, once the damage occurs, premature scrapping and replacement will lead to the high cost of materials used by the enterprise itself. Therefore, as long as companies with very good cost accounting control, they tend to be very careful when purchasing diamond saw blades. In addition to the need to reduce operating costs, the cost of a single diamond saw blade is also quite expensive. And as long as the diamond saw blade starts to saw the processing material, whether it is wood or aluminum, the diamond saw blade is bound to wear out. Among them, the tooth tips of the teeth of the diamond saw blades are the hardest hit areas that are prone to wear. At this time, when the wear problem of diamond saw blades occurs, there are often very few measures left for enterprises to take. In order to prevent the diamond saw blades used by themselves from being scrapped in advance, the following three measures must be done well.

First of all, as a member of the big family of saw blades, diamond saw blades are the same as other saw blades. The manufacturing strength of the relevant saw blade manufacturers directly determines the original performance of the saw blade. It can be said that whether the diamond saw blade is durable or not, the basic performance of the saw blade is very important. In order to ensure the basic performance of the original diamond saw blade, it is particularly important to choose the supplier of the diamond saw blade. At present, when purchasing related diamond saw blades, if the supplier of the saw blade does not even have its own manufacturing capacity, it must be selected carefully, at least after trial cutting.

Secondly, the cost of diamond saw blades is high, and the daily operation should be cautious. If the quality of the personnel responsible for operating the diamond saw blades is low, they will not adjust the rotation speed and feed speed of the saw blade according to the characteristics of the material. The probability of wear and tear will be greatly improved. The normal practice is to strengthen the operation training for personnel, especially to establish a pre-job training mechanism within the enterprise. Make sure that the workers who operate the diamond blades are skilled. Of course, when using diamond saw blades on a daily basis, especially when processing and sawing some materials that are very difficult to saw. The corresponding grinding follow-up preparations are still to be done.

Due to the excellent performance of diamond itself, once the saw blade itself wears out, the diamond saw blade can be kept for several months by grinding. Compared with the grinding of ordinary alloy saw blades, the grinding of diamond saw blades is more cost-effective. For saw blades of the same material, diamond saw blades can be ground 5 to 8 times more than ordinary alloy saw blades after wear. Of course, the premise is that the wear degree of the diamond saw blade itself cannot be too high. For example, the matrix of the diamond saw blade itself has a broken saw blade, which basically loses the possibility of being repaired. Therefore, the grinding of diamond saw blades is also a technical task, and the grinding of diamond saw blades must be handed over to powerful manufacturers.

In general, if the diamond saw blade is not to be scrapped in advance, one needs to understand the strength of the supplier, the second is to process the operation of the diamond saw blade, and the third is to make full use of the saw blade for grinding. .